Compaq 102 Manual De Usuario

USB/audio board (includes cable)

600124-001

Before removing the USB/audio board, follow these steps:

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet

and then unplugging the AC Adapter from the computer.

Remove the battery (see 

).

If your computer has WWAN capability, remove the SIM (see 

Remove the following components:

a. Keyboard (see 

b. Hard drive (see 

).

Top cover (see 

Remove the USB board:

Release the ZIF connector (1) to which the USB/audio board cable is connected, and disconnect

the cable (2).

Release the USB/audio board from the clip attached to the base enclosure (3), and remove the

USB/audio board (4).

Reverse this procedure to install the USB/audio board.

54 Chapter 4   Removal and replacement procedures