Compaq 102 Manual De Usuario

Heat sink assembly (includes replacement thermal material)

537619-001

Before removing the heat sink assembly, follow these steps:

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet

and then unplugging the AC adapter from the computer.

Remove the battery (see 

).

If your computer has WWAN capability, remove the SIM (see 

Remove the following components:

a. Keyboard (see 

b. Hard drive (see 

)

Top cover (see 

d. WLAN module (see 

e. Fan (see 

Remove the heat sink assembly:

Remove the 4 Phillips PM1.6×2.5 screws (1) that secure the heat sink assembly to the system

board.

The screws are numbered 1 through 4. Follow this order when removing the screws.

58 Chapter 4   Removal and replacement procedures