IBM 770 Manual De Usuario
RT/CMOS Address and NMI Mask Register (Hex 0070)
The NMI mask register is used with the RT/CMOS data register (hex
0071) to read from and write to the RT/CMOS RAM bytes.
0071) to read from and write to the RT/CMOS RAM bytes.
Attention
The operation following a write to hex 0070 should access hex 0071;
otherwise, intermittent failures of the RT/CMOS RAM can occur.
The operation following a write to hex 0070 should access hex 0071;
otherwise, intermittent failures of the RT/CMOS RAM can occur.
Figure
2-13. RT/CMOS Address and NMI Mask Register (Hex 0070)
Bit
Function
7
NMI mask
6–0
RT/CMOS RAM address
Bit 7
When this write-only bit is set to 1, the NMI is masked
(disabled). This bit is set to 1 by a power-on reset.
(disabled). This bit is set to 1 by a power-on reset.
Bits 6–0
These bits are used to select RT/CMOS RAM
addresses.
addresses.
RT/CMOS Data Register (Hex 0071)
The RT/CMOS data register is used with the RT/CMOS address and
NMI mask register (hex 0070) to read from and write to the
RT/CMOS RAM bytes.
NMI mask register (hex 0070) to read from and write to the
RT/CMOS RAM bytes.
Figure
2-14. RT/CMOS Data Register (Hex 0071)
Bit
Function
7–0
RT/CMOS data
2-20 System Board