Compaq 1825 Manual De Usuario

To protect your monitor from overheating and other types of 
damage:

■

Use only a power source and connection appropriate for this 
monitor, as indicated on the marking label/back plate and the 
AC adapter.

■

If an extension cord or power strip is used, make sure that the 
cord or strip is rated for the product and that the total ampere 
ratings of all products plugged into the extension cord or 
power strip do not exceed 80% of the extension cord or strip 
ampere ratings limit.

■

Do not overload an electrical outlet, power strip, or 
convenience receptacle. The overall system load must not 
exceed 80% of the branch circuit rating. If power strips are 
used, the load should not exceed 80% of the power strip 
input rating.

■

Install the monitor near an outlet that you can easily reach. 
Disconnect the product by grasping the plug firmly and 
pulling it from the outlet. Never disconnect it by pulling 
the cord.

■

Unplug the monitor from the wall outlet before cleaning. Do 
not use liquid cleaners or aerosol cleaners. 

■

Slots and openings in the cabinet are provided for ventilation. 
These openings must not be blocked or covered. Never push 
objects of any kind into cabinet slots or other openings.

■

Do not drop the monitor or place it on an unstable surface.

■

Do not allow anything to rest on the power cord. Do not walk 
on the cord.

Sarah User Guide.book Page 17 Tuesday, September 3, 2002 8:33 AM