Compaq 1825 Manual De Usuario

You can remove the monitor base to mount the monitor on a wall, 
a swing arm or other mounting fixture. To remove the monitor 
from the base, read the caution and warning below before 
beginning the procedure.

Ä

CAUTION: Before beginning to disassemble the monitor, be sure 

the monitor is turned off and the power and signal cables are both 

disconnected.  

 

Lay the front bezel down on a soft area to prevent it from getting 

scratched, defaced, or broken

Å

WARNING: Do not remove the base from the monitor while the 

monitor is in the upright position. Before removing the monitor from 

the base, ensure that the monitor is lying flat, front bezel down, and 

that the base is set to the maximum base extension. Attempting to 

remove the monitor from the base while upright in the minimum base 

extension may result in injury to the user.

1. Disconnect and remove the signal and power cables from the 

back of the monitor.

Sarah User Guide.book Page 7 Tuesday, September 3, 2002 8:33 AM