Bodyline Products International 216MFD Manual De Usuario

The AXIS 216FD/FD-V/MFD/MFD-V includes support for Bonjour. When enabled, the 

camera is automatically detected by operating systems and clients that support this. 

These settings are the port range, IP address, port number (video and audio), and 

Time-To-Live value to use for the video stream(s) in multicast MPEG-4 format. Only 

certain IP addresses and port numbers should be used for multicast streams. For more 

information, please see the online help.

I/O Ports - the pinout, interface support and the control and monitoring functions 

provided by this connector are described in The I/O Terminal Connector, on page 47.

The Status indicator LED on the front of the camera can be set to flash at a configurable 

interval (or to not light up at all) whenever the unit is accessed. For a listing of all LED 

behavior, see page 9, or the online help. Note that the LED does not flash when the stream 

is retrieved using MPEG-4 multicast.

• Restart - The camera is restarted without changing any of the settings.
• Restore - The unit is restarted and most current settings are reset to factory default val-

ues. The settings that will not be reset are as follows:

• the boot protocol (DHCP or static)
• the static IP address
• the default router
• the  subnet  mask

• Default - The default button should be used with caution. Pressing this will return all of 

the camera's settings to the factory default val5(r.7951 Tc 0 94(R)uttonPp60.7951 Tc 3592 The)-4( static )</MCID 15 1nval5(sos10.9te)794(e boo can J-0.0011 Tw)]TJ-0.0006 Tc -0.001cad592ultrall794(t)796( )]TJ/TT24