Bodyline Products International 216MFD Manual De Usuario

The 4-pin I/O terminal connector provides the interface to: 

• 1 transistor output
• 1 digital input
• auxiliary power and GND

The terminal connector is used in applications for e.g. motion detection, event triggering, 

time lapse recording, alarm notification via email, image storage to FTP locations, etc.

• Input - for connecting e.g. a push button. If the push button is pressed, the state 

changes and the input becomes active (shown under Event Configuration > Port 

Status).

• Output - connects e.g. an alarm device that can be activated by Output buttons 

on the Live View page, or by an Event Type. The output will show as active 

(Event Configuration > Port Status) if the alarm device is activated.