Cisco Systems PA-MC-8TE1 Manual De Usuario
lbo
To set a cable length longer than 655 feet for a DS-1 link, use thelbocommand in interface configuration mode
on the interface for a T1 link. To delete the lbovalue, use the no form of this command.
on the interface for a T1 link. To delete the lbovalue, use the no form of this command.
lbo {long {gain26| gain36} {-15db| -22.5db| -7.5db| 0db}| short {133| 266| 399| 533| 655}}
no lbo
Syntax Description
Specifies the long-haul mode where the gain and line
build out must be configured.
build out must be configured.
long
Specifies the decibel pulse gain at 26 decibels. This
is the default pulse gain.
is the default pulse gain.
gain26
Specifies the decibel pulse gain at 36 decibels.
gain36
Specifies the decibel pulse rate at -15 decibels.
-15db
Specifies the decibel pulse rate at -22.5 decibels.
-22.5db
Specifies the decibel pulse rate at -7.5 decibels.
-7.5db
Specifies the decibel pulse rate at 0 decibels. This is
the default.
the default.
0db
Specifies the short-haul mode where the cable length,
in feet, must be configured.
in feet, must be configured.
short
Specifies a cable length from 0 to 133 feet.
133
Specifies a cable length from 134 to 266 feet.
266
Specifies a cable length from 267 to 399 feet.
399
Specifies a cable length from 400 to 533 feet.
533
Specifies a cable length from 534 to 655 feet.
655
Command Default
gain26 and0db
Command Modes
Interface configuration
Cisco IOS Interface and Hardware Component Command Reference
30
l2 vfi manual through loopback PA-MC-8TE1 + port adapter
lbo