Gateway CG3100 Manual De Usuario

Note: WPS is incompatible with WEP security. If WEP is configured in the gateway 

then WPS cannot be enabled.

Wireless Configuration

2-13

3. Select Enable in the WPS Config field and click Apply. 

4. In the WPS Method field, select PIN. 

5. Write down the STA PIN number.

6. Go to the client wireless computer. Run a WPS configuration utility. Follow the utility’s 

instructions to enter the gateway STA PIN number.

7. On the Wireless Settings screen, click Start WPS. 

•

The WPS LED on the front of the gateway begins to blink.

•

The gateway tries to communicate with the client for 4 minutes.

•

If the Security Option in the Wireless Settings screen was set to Disabled, the gateway 
automatically changes it to WPA-PSK (including a PSK security password).

When the gateway adds the WPS client, it sends the SSID and WPA-PSK or WPA2-PSK 
configuration to the client. 

To access the Internet from any computer connected to your gateway, launch a browser such as 
Microsoft Internet Explorer or Mozilla Firefox. You should see the gateway’s Internet LED blink, 
indicating communication to the ISP.

You can add more WPS clients to your wireless network, or you can add a combination of WPS-
enabled clients and clients without WPS.

To add a wireless client device that is WPS-enabled, follow the procedures in 

.