Coleman 9273C128 Manual De Usuario

Connect Frame to Tent

– Insert one end of main tent pole end

onto pin of pin & ring system, at tent
corner. (illus. 4)

– Go to opposite end of pole and 

gradually apply pressure to the pole
forming an arch until you are able to
insert the pin into the pole.

– Repeat for second and third poles.

TIOGA

™

12’x 8’ 

1

Layout & Positioning 
of Tent, Pole Assembly

– Layout and position tent with doors

facing desired direction. (illus. 1)

– Unzip doors.
– Stake down tent corners only, using

the rings at the end of the stake loops.
Keep the floor taut. (illus. 2) 

– Assemble Frame Poles by 

interlocking shock-corded poles. 
This will make three long poles. 

– Insert the poles diagonally into three

Pole Sleeves. (illus. 1)

2

– Select a level campsite clear of rocks,

branches and other hard or sharp objects. 

– Do not set up your tent under trees. 
– For best results in windy conditions,

do not position the door of tent into
the wind.

Insert poles
through 
three pole 
sleeves

Instructions apply to Part Number 9273C128

illus. 1

Part No. 9273C121

Part No. 9273C122

Tent frame 

set-up

illus. 3

illus. 2 

Tent stake

through ring

illus. 4

Insert pole end onto 
pin & ring