Clifford 570.4X Manual De Usuario

36

© 2011 Directed Electronics. All rights reserved.

36

Timer Start operation 
Activation begins a countdown timer as set by the installer (de-
fault 3 hours). When the timer expires the engine starts and the 

 message is sent to the remote control. When the 

Remote start runtime expires the engine shuts off, the 

  

message is sent to the remote control and the countdown timer restarts. 
This will repeat as many times as set by the installer (default 6 starts). 
Timer Start is exited after the final start.
 
Smart Start operation 
Smart Start uses the settings for Timer Start in addition to temperature 
and battery level to automatically start the engine. Activation begins 
the countdown timer. When the timer expires the vehicle interior tem-
perature and battery level is checked and, if the Temperature is above 
100F, below 0F, or  the battery level is below 10.5v, the engine will 
start and the 

 message will be sent to the remote 

controls. When the Remote start runtime expires the engine shuts off, 
the  

 message is sent to the remote control and the 

countdown timer restarts. Smart Start is exited after the final start.

Note

The temperature and battery thresholds can be changed by 
an authorized Directed dealer if a higher or lower threshold 
is desired.

Temperature Reporting

During Remote start the vehicle interior is checked regularly for tem-
perature changes. If a change in temperature is detected this report 
will be sent to the remote for display. Each time the remote receives 
this report it will beep, update, and display the newest temperature 
information using the Temperature Gauge icon.