Curtis Mathes CMC13410 Manual De Usuario
12
C
HAPTER
T
WO
: I
NSTALLATION
C
HAPTER
T
WO
I
NSTALLATION
Connecting VHF and
UHF Antennas
UHF Antennas
If you do not have cable TV, you
must connect an antenna to your
TV/VCR. First you need to identify
your antenna’s lead type:
must connect an antenna to your
TV/VCR. First you need to identify
your antenna’s lead type:
• If you are using the antenna
that has 300-ohm twin flat
leads, (see the illustration
below) see “Antennas With
300-ohm Flat Twin Leads,”on
this page.
leads, (see the illustration
below) see “Antennas With
300-ohm Flat Twin Leads,”on
this page.
• If your antenna has a 75-ohm
round lead (see the
illustration below), see
“Antennas With 75-ohm
Round Leads,” on this page.
illustration below), see
“Antennas With 75-ohm
Round Leads,” on this page.
• If you have two antennas,
see “Separate VHF and UHF
Antennas,” on this page.
Antennas,” on this page.
Antennas With 300-ohm
Flat Twin Leads
Flat Twin Leads
If you use a different 300-ohm
antenna with twin flat leads,
follow the directions below, but
skip step 1.
antenna with twin flat leads,
follow the directions below, but
skip step 1.
1
Push the stem of the rod
antenna into the antenna
mount.
antenna into the antenna
mount.
2
Place the wires from the twin
leads under the screws on
the 300-75 ohm adapter (not
supplied). Use a screwdriver
to tighten the screws.
leads under the screws on
the 300-75 ohm adapter (not
supplied). Use a screwdriver
to tighten the screws.
3
Plug the adapter into the
terminal on the rear panel of
the TV/VCR.
terminal on the rear panel of
the TV/VCR.
Extend the antenna and
adjust it for the clearest
picture.To reduce the risk of
damage, only adjust the
antenna by moving the black
plastic base.
adjust it for the clearest
picture.To reduce the risk of
damage, only adjust the
antenna by moving the black
plastic base.
Antennas With 75-ohm
Round Leads
Round Leads
1
Plug the lead into the
terminal on the rear panel of
the TV/VCR.
terminal on the rear panel of
the TV/VCR.
Separate VHF and UHF
Antennas
Antennas
If you have two separate anten-
nas for your TV/VCR (one VHF
and one UHF), you must combine
the two antenna signals before
connecting them to the TV/VCR.
This procedure requires a com-
biner attachment that you can
purchase at an electronics
store.
nas for your TV/VCR (one VHF
and one UHF), you must combine
the two antenna signals before
connecting them to the TV/VCR.
This procedure requires a com-
biner attachment that you can
purchase at an electronics
store.
CMC13410/19410 3/28/02 11:02 AM Page 12