Honeywell VRX180 Manual De Usuario

Use Copy Block to copy the setup of any function block to another channel of the same function block. 
For example, if you have programmed AI1 and want AI2 to have the same settings, use Copy Block.  If 
desired, you can make program changes to AI2 after the copy is complete. 

If your instrument can run multiple profiles at the same time, Copy Block is useful for copying the 
parameters of one profile to another.  For example, if your instrument can run 2 profiles, it may be useful 
to have both profiles use the same switches for starting, holding, and resetting.  After you program the 
first profile’s parameters, use Copy Block to copy Profile #1 to Profile #2. 

 

Table 4-53 describes the Copy Block prompts. 

BLOCK TYPE 

AI, AO, AL, CN, CV, DI, 
DO, LP, TL, SP 

Select the function block type to be copied. 

AI: Analog Input 

AO: Analog Output 

AL: Alarm 

CN: Constant 

CV: Calculated Value 

DI: Discrete Input 

DO: Discrete Output 

LP: Control Loop 

SP: Set point Profile 

TL: Totalizer 

FROM NUMBER 

NUMBER 

Enter the channel number to be copied. 

TO NUMBER 

NUMBER 

Enter a channel to copy to or "ALL" if you want to copy this block 
to all other channels. 

COPY BLOCK 

 

Select this to do the copy.  A verification prompt lets you continue 
or abort the copy.