Honeywell VRX180 Manual De Usuario

A

A

A

A

A

 followed by text 

description of alarm 

Red 

An active alarm exists.  Flashes while unacknowledged.  When the 
operator acknowledges the alarm, the flashing will stop. The symbol 
and text will remain until the alarm has cleared. 

D

D

D

D

D

 followed by text 

description of diagnostic 

Blue 

A diagnostic error has been detected.  Flashes while 
unacknowledged.  The symbol and text will remain until the operator 
acknowledges or deletes the diagnostic in the online Access 
Summaries menu. 

UPDATING DISK 

Yellow 

Instrument is flushing all buffered data to the disk. 

CHECKING DISK 

Yellow 

Whenever the front panel has been opened and closed, the 
instrument checks that a properly formatted disk is installed and 
ready to receive data. 

INITIALIZING 

Yellow 

Initialization is in progress. 

DS INIT FAILED 

Yellow 

Initialization failed. Possible reasons: disk has not been formatted,  is 
write-protected, or is defective. 

STORAGE FULL 

Yellow 

Less than 5 minutes of space remains in the internal buffer. Data is 
accumulating in the internal buffer (temporary storage) because it is 
unable to store the data on the floppy disk. Possible reasons include: 

• 

Disk is full and storage is programmed as non-rollover. 

• 

There is no disk in the drive. 

• 

The disk is write-protected.  

• 

The operator is in the process of retrieving stored data from the 
disk. 

• 

The disk is “not current” (see DSK NOT CURRENT below).  

• 

The front bezel is open.  

The message will disappear when the condition is corrected, or if data 
storage is disabled (turned off). 

DISK FULL 

Yellow 

No more space is available on one or more of the files on the floppy 
disk for storage of data as programmed. This message will appear 
only if at least one partition on the disk is programmed for non-
rollover operation. The message will disappear when a new disk is 
initialized, or if data storage is disabled (turned off). 

DISK WARNING 

Yellow 

Floppy disk is not full but available space on one or more disk files 
has reached the programmed warning limit. The message will 
disappear when a new disk is initialized, or if data storage is disabled 
(turned off). 

BEZEL OPEN 

Yellow 

Instrument front panel is open or is not closed securely. 

DISK ERROR 

Yellow 

The instrument is attempting to store data but the disk is either not 
properly formatted or is faulty. The message disappears when the 
disk is formatted or replaced, or if data storage is disabled (turned 
off). 

DSK NOT CURRENT 

Yellow 

When a disk is initialized the instrument marks it as the “current” disk. 

The instrument will only store data to the “current” disk. If any other 
disk is placed in the drive this message will appear. The message will 
disappear when the “current” disk is inserted or a new disk is 
initialized. 

WRITE-
PROTECTED 

Yellow 

The disk in the drive has its write-protected tab set to the protect 
position. 

DISK MISSING 

Yellow 

Data storage is enabled, but no disk is installed in the disk drive.