Topfield TF 5000 Manual De Usuario
2.4 Connecting the digital receiver
11
11
⃝
RF OUT
Analog television output socket.
12
⃝
S/PDIF
Dolby Digital output socket for the au-
dio system.
dio system.
13
⃝
USB
USB port for firmware update and data
transfer.
transfer.
14
⃝
RS-232
Serial port for firmware update and data
transfer.
transfer.
Table 2.3: Connectors specification
TV SCART
CVBS / S-Video / RGB / YUV video output
Left & right audio output
Left & right audio output
VCR SCART
CVBS video output
Left & right audio output
CVBS / S-Video / RGB / YUV video input for bypass
Left & right audio input for bypass
Left & right audio output
CVBS / S-Video / RGB / YUV video input for bypass
Left & right audio input for bypass
S-Video
S-Video output
RCA AV
Composite video output
Left & right audio output
Left & right audio output
S/PDIF
Dolby Digital audio output
RS-232
9 pin D-sub type
Transfer rate: 115.2 kbps at maximum
Transfer rate: 115.2 kbps at maximum
USB
2.0 Device
2.4
Connecting the digital receiver
There are several ways to install the digital receiver as de-
scribed below. Install the digital receiver suitably to your tele-
vision and other appliances. If you have any problem with
your installation or need a help, contact your dealer or service
provider.
scribed below. Install the digital receiver suitably to your tele-
vision and other appliances. If you have any problem with
your installation or need a help, contact your dealer or service
provider.
You should configure audio and video settings after installa-
tion. For detailed descriptions about audio and video settings,
refer to § 3.2.
tion. For detailed descriptions about audio and video settings,
refer to § 3.2.