Coleman 919A162 Prospecto

STITCH LINE

TM   

Read all instructions before set up.
• Select a level site clear of rocks, branches, and other hard or 

sharp objects, to install your Beach Shade.

•  Do not set up your Beach Shade under trees.
•  For best results in windy conditions, position end of Beach 

Shade into the wind.

•  Enlist the help of at least one other person to assist you when 

it is time to assemble the Beach Shade.

1. Unfold Beach Shade and spread out on a clean, level surface 

with the door facing the desired direction. Unzip door.
(Fig. 1)

3. Assemble both Main (black) Poles and the Crossover (gray) 

Pole by interlocking shock-corded poles.

4. Insert the Main (black) Poles through the pole sleeve running

side to side. (Fig. 3)

5. Insert the Crossover (gray) Pole through the pole sleeve

running side to side. (Fig. 3)

6. Insert one end of the gray Crossover Pole into the grommet 

on the web strap on either side of front door. (Fig. 4)

8. Go to the back of the 

Beach Shade and 
insert black Main Pole 
tip into the grommet 
on the web strap.
(Fig. 6)

(continued on other side)

Main Poles - Black (2)

9192-902

Crossover Pole - Gray (1)

9192-922

Main Poles (2)

Crossover Pole (1)

2. Stake down shade corners, 

using the outside grommets on 
the web straps. Keep the floor 
taut. (Fig. 2)
Option: Use sand bags to weight
shelter down, see Fig. 15 & 16.

7. Go to opposite end of the gray pole and gradually apply

pressure to the pole, forming an arch, until you are able to 
insert the pole tip into the grommet on the web strap. (Fig. 5)

9. From the front of the Beach Shade, gently pull the black Main

Pole down until you 
can insert the end into 
the grommet on 
the web strap located 
above the door open
ing. (Fig. 7)

10. Repeat for the 

second black 
Main Pole.
(Fig. 8)