Coleman X1 Prospecto

– Insert one Pole Talon™ into pole on stake loop 

located at middle edges of the tent.(illus. 3)

– Go to opposite end of pole and 

gradually apply pressure to the 
pole forming an arch until you
are able to insert the pole talon 
into the pole.(illus. 3 & 4)

– Attach Frame Clip on each 

side of tent. (illus. 5)

– Tie frame ties 

around the tent pole.

1

2

– Layout and position tent with doors facing 

desired direction. (illus. 1)

– For best results in windy conditions position 

end of tent into the wind.

– Stake down tent corners using the stake loops.

Keep the floor taut. Unzip doors. (illus. 2)

– Assemble Frame Poles by interlocking 

shock-corded sections. This will make one long
and one short “U” shaped pole. 

– Insert the longer pole through the pole sleeve 

located in the middle of the tent and the shorter
pole into the sleeve at the foot of the tent. (illus. 1)

Part No. 9830-1191

Part No. 9830-1291

Part No. 9830-1391

Two side doors

Pole Sleeve

illus. 2 
Tent stake
through Loop

Insert Pole Tip

into grommet

Tent completely set up and 

staked out.

Frame Clips