Cisco Systems 8450HDC Manual De Usuario

5

To use the set-top with an HDTV, you must make one of the following connections to view the HD content. In addition, 
you can make connections to a digital or analog VCR to record to a VCR tape. Refer to your TV and VCR user guides 
and the cabling diagrams in this guide for more detailed connection information.

Note: The labeling on your set-top, HDTV, and VCR may vary slightly.

For VCRs with Video and Left and Right audio connectors, you 
can use the Out 2 connectors (Video, Left, and Right) on the 
set-top.

See the connection diagram on page 15 for an example.

For VCRs with S-Video and Left and Right audio 
connectors, you can use the S-Video Out and the 
Out 2 Left and Right connectors on the set-top.

Some HDTVs have a High-Defi nition Multimedia Interface (HDMI) 
connector. The HDMI connector provides both a digital video and 
audio connection.

See the connection diagram on page 11 for an example.

The YPbPr connectors can provide high-defi nition component 
video signals to an HDTV. 

Note: Use the HD Setup Wizard on the set-top to set the HD 
mode and select the output video format that will matches the 
full capabilities of your HDTV. 

See the connection diagram on page 13 for an example.

The HDMI connector can provide the connection to an HDTV 
with a DVI input. If your HDTV has a Digital Visual Interface (DVI) 
connector, you will need an HDMI-to-DVI adapter, and you will 
need to connect a separate audio connection. 

See the connection diagram on page 12 for an example.

Some HDTVs have only RGB connectors. If you have one of 
these HDTVs, you need an RGB adapter. 

Check with your service provider for information about acquiring 
an RGB adapter, or you can purchase the adapter at your local 
electronics supplier.