Cisco Systems 303 Manual De Usuario
Using Advanced Phone Features
Advanced Procedures for Technical Support Personnel (Cisco SPA 303)
Cisco Small Business IP Phone SPA 30X User Guide (SIP)
70
4
Advanced Procedures for Technical Support Personnel (Cisco
SPA 303)
SPA 303)
!
CAUTION
These menus are used to configure and troubleshoot your phone and the phone
network. You should not change these settings or perform these actions unless
directed to do so by your phone administrator.
network. You should not change these settings or perform these actions unless
directed to do so by your phone administrator.
STEP 1
Press the Setup button.
Number
Option
100
Tells you if Dynamic Host Configuration Protocol (DHCP) is enabled.
110
Recites the IP address of the phone.
120
Recites the netmask of the phone.
130
Recites the gateway address.
140
Recites the MAC (hardware) address of the phone.
150
Recites the phone software version.
160
Recites the primary DNS server address.
170
Recites the HTTP port on which the web server listens. Defaults to 80.
180
Recites the IP multicast address (used by the Cisco SPA 9000 to
communicate with the IP phone).
communicate with the IP phone).
220
Recites the method of call control (SIP or SPCP).
73738
Restore the phone to the factory default software and settings.
Enter 1 to confirm, or * to exit. If you chose to reset, hang up to exit and
begin the restore process.
begin the restore process.
732668
Reboot the phone. After entering #, hang up to begin rebooting.