Toshiba 50HMX96 Manual De Usuario
52
HMX96 (E/F) Web 213:276
Chapter 5: Using the TV’s features
Setting the On/Off Timer
You can use the On/Off Timer to turn the TV on and off at a
preset time on a recurring basis.
preset time on a recurring basis.
Note: You must first set the time (
- page 28).
To set the On/Off Timer:
1
Press
Y and open the Setup menu.
2
Highlight On/Off Timer and press
T.
3
In the DAY field, press C or c to select the recurrence
(weekends, weekdays, every day, etc).
(weekends, weekdays, every day, etc).
4
Press b to highlight the Time field, and then use the
Number buttons to enter the time you want the TV to turn
on.
Number buttons to enter the time you want the TV to turn
on.
5
When the AM/PM field is highlighted, press c to select
AM or PM.
AM or PM.
6
Press b to highlight the TV ON Duration field, and then
press C or c to select the length of time until the TV turns
off (30 Minutes, 1 Hour, 2 Hours, 4 Hours,
8 Hours, 12 Hours).
press C or c to select the length of time until the TV turns
off (30 Minutes, 1 Hour, 2 Hours, 4 Hours,
8 Hours, 12 Hours).
7
Highlight Done and press
T.
8
Turn off the TV. The TV will turn on automatically on the
day(s) and at the time you set. The TV will then turn off
automatically after the length of time you set in the TV
ON Duration field.
day(s) and at the time you set. The TV will then turn off
automatically after the length of time you set in the TV
ON Duration field.
Note:
• When a power failure occurs, the On/Off Timer settings
may be cleared.
• To display the On/Off Timer setting, press
E.
To turn off the On/Off Timer:
Select Not Set in step 3 above.
Using the PC setting feature
You can view the image from a PC on the TV screen. The PC
must be connected to the TV’s PC IN terminals
(- Installation Guide).
You can use the PC Settings feature to adjust the picture’s
horizontal position/width, vertical position/height, clock
phase, and sampling clock.
If the edges of the picture are cut off, readjust the Horizontal
Position/Width and Vertical Position/Height. If the
picture is affected by interference, readjust the Clock Phase
and Sampling Clock.
must be connected to the TV’s PC IN terminals
(- Installation Guide).
You can use the PC Settings feature to adjust the picture’s
horizontal position/width, vertical position/height, clock
phase, and sampling clock.
If the edges of the picture are cut off, readjust the Horizontal
Position/Width and Vertical Position/Height. If the
picture is affected by interference, readjust the Clock Phase
and Sampling Clock.
To adjust the PC settings:
1
Repeatedly press
+ to select PC input mode
(- “Selecting the video input source to view” page 32).
2
Press
Y and open the Setup menu.
3
Highlight PC Settings and press
T.
Note: If a PC is not connected, this feature will be grayed
out in the Setup menu.
out in the Setup menu.
4
Press B or b to highlight the item you want to adjust.
5
Press C or c to make the appropriate adjustments.
Note: The screen is disrupted momentarily when adjusting the
PC settings. This is not a sign of malfunction.
PC settings. This is not a sign of malfunction.
•
Horizontal Position:
Moves the picture left/right.
The adjustment range is within ±5 from center.*
Moves the picture left/right.
The adjustment range is within ±5 from center.*
•
Vertical Position:
Moves the picture up/down.
The adjustment range is within ±5 from center.*
Moves the picture up/down.
The adjustment range is within ±5 from center.*
•
Horizontal Width:
Adjusts the width of the picture.
The adjustment range is within ±5 from center.*
Adjusts the width of the picture.
The adjustment range is within ±5 from center.*
•
Vertical Height:
Adjusts the height of the picture.
The adjustment range is within ±5 from center.*
Adjusts the height of the picture.
The adjustment range is within ±5 from center.*
On/Off Timer
Turn TV ON:
:
Weekends
Time (HH:MM)
TV ON Duration:
30 Minutes
Reset
Done
Cancel
Day
0 9
0 0
AM
On/Off Timer
Turn TV ON:
Not Set
Day
Reset
Done
Cancel
CH RTN
ENTER
EXIT
Navigate
Select
Back
Exit
Installation
Sleep Timer
On/Off Timer
Setup
PC Settings
Auto
ColorStream HD1 Audio
No
No
HDMI 1 Audio
ColorStream HD2 Audio
Done
PC Settings
Horizontal Width
0
Vertical Position
Reset
Horizontal Position
0
0
0
0
0
Vertical Height
Clock Phase
Sampling Clock
HMX96_EN.book Page 52 Friday, April 28, 2006 12:03 PM