Sterling XXX10-80 Manual De Usuario

10-Pump, 80-Station Controller           Chapter 4: Operation 

52 

The following table explains the status represented by each color at the Station Status screen. 

Silver 

Offline 

Station is not enabled. The controller ignores any demands or 
alarms. 

Blue 

Ready 

Station is enabled and idle (full). 

Dark Yellow 

Demand 

Station requires material. 

Light Green 

Purging 

The material line is being purged of material. 

Brown 

Dumping 

The station is dumping material into its receiver. 

White 

Blow Back 

Station’s air filter is being cleaned by blowing compressed air 
backward through it. 

Dark Grey 

Bypass 

Bypass switch at the station has been turned on, disabling the 
station. 

Medium 
Green 

Priority 
Convey 

Station is in priority convey mode. Its pump will be temporarily 
dedicated to filling it as soon as possible. 

Orange 

Alarm 

Station is in alarm. 

Red 

Critical 

Station is in critical alarm. The controller has disabled the station 
until the alarm is cleared. 

Purple Closed 

Loop 

Station is in closed loop convey. 

Light Yellow 

Waiting 

Station is waiting for material to become available. 

Dark Green 

Convey 

Station is being loaded. 

 

Additional basic information about each station (convey time, dump delay, pump assignment, 
and, if enabled, RPV setting, purge settings, etc.) is available at the Station n Operator screen. 
See page 55 for details. 

Detailed configuration settings for each station are available at the Station n Setup screen. See 
page 39 for details. 

Reviewing Pump Status 
The Pump Status screen is the counterpart of the Station Status screen. To reach the Pump 
Status screen from any other screen: 

1.  Touch Pumps. 

 

The Pump Status screen appears: 

 

 

 

 

 

 

 

 

 

 

The status of each pump is color-coded, as summarized in the upper right of the screen. 

You can see a more detailed explanation of each status by using the online help. To do so 
from this screen: