Brocade Communications Systems 12.4.00a Manual De Usuario

Displaying socket information

6

Displaying socket information 

The following socket information is available from the BP console within the rconsole mode.

•

Socket detail in open status

•

All sockets in open status

•

Socket state information

To access the display command that present this information, you must enter the BP console using 
the rconsole command as shown in 

 on page 188.

Displaying socket details in open status

Use the show socket id command in the rconsole mode to display socket detail in open status, as 
shown in the following.

ServerIronADX1/1# show socket id 0

Sock       Peer        Local                State   rx_q_bytes tx_q_byptes

0000       0.0.0.0:    0 10.10.1.100:  443  LISTEN  00000000   00000000

Syntax: show socket id <HEX>

The <HEX> variable specifies the socket ID number in hexadecimal form of the socket that you 
want to display details for.

Displaying all sockets in open status

Use the show socket list command in the rconsole mode to display all sockets in open status, as 
shown in the following.

Syntax: show sock list

ServerIronADX# rconsole 1 1

ServerIronADX1/1# show sock lis

Sock      Peer              Local         State    rx_q_bytes   tx_q_byptes

0000     0.0.0.0:0         10.10.6.10:     443      LISTEN       00000000  00000000

0001     0.10.6.50:3832    10.10.6.10:     443      ESTABLISHED  00000000  00000000

0002     209.157.22.1:80  10.10.6.50:3832 SYN_SENT 00000000     00000000