TANDBERG 7000 Manual De Usuario

46

TANDBERG Videoconferencing System

General use

Plugging a PC into the system is made extremely simple through the PC Presenter, avoiding the need for any
additional hardware such as a projector, PC/Video converter or extra cables.

• Connect the pre-connected VGA cable to your PC (VGA Output).

• Start your PC.

• Press PC on your remote control.

• Press S

 until the indicator ‘Selfview‘ is displayed on your main monitor (single monitor system) or until

you see the PC image on the second monitor.

If no PC image is displayed on your monitor, make sure that your PC transmits the image to the VGA Output, and
that the PC transmits a supported VGA-format (see tip below). Consult your PC-operating manual to see how to
transmit a VGA image from your PC (typically: Fn+F5).

PC SoftPresenter is used to display PC images on your system without using a VGA cable (PC Presenter). The
TANDBERG video conferencing system and your PC must be connected to a LAN. In addition, VNC (Virtual
Network Computing) server software must be installed on the PC.

To show the PC image:
• Start the VNC software on your PC.
• Press PC on your remote control. Use UP/DOWN to activate PAGE UP/PAGE DOWN on the PC.
For setup information and details, see ‘VNC Settings’ in ‘Advanced use’.

‘PC: VNC’ 

MUST

 

BE

 

SET

 

IN

 ‘V

’.

I

N

 

ORDER

 

TO

 

SHOW

 PC 

IMAGES

 

WITH

 

SUPERIOR

 

QUALITY

, 

THE

VGA 

INPUT

 

ON

 

THE

 

PLASMA

 

MONITOR

 

WILL

 

BE

 

ACTIVATED

 

WHEN

PRESSING

 PC.

VGA-

FORMATS

 

SUPPORTED

 (VESA 

COMPLIANT

)

·VGA     640X480   60,72,75,85 H

Z

·SVGA  800X600     56,60,72,75,85 H

Z

·XGA     1024X768  60,70,75 H

Z