Cisco Systems ATA187I1ARF Manual De Usuario
4-5
Cisco ATA 187 Analog Telephone Adaptor Administration Guide for SIP (Version 1.0)
OL-21862-01
Chapter 4 Configuring the ATA 187
Configuring Product Specific Configuration Parameters
Configuring Product Specific Configuration Parameters
Cisco Unified Communications Manager Administration allows you to set some product specific
configuration parameters for the ATA 187.
configuration parameters for the ATA 187.
lists the configuration windows and their paths to
configure the parameters.
Administration.You can set the configuration parameters using any of the three configuration windows
listed in
listed in
.
When you set the parameters, select the Override Common Settings check box for each setting you wish
to update. If you do not check this box, the corresponding parameter setting does not take effect.
to update. If you do not check this box, the corresponding parameter setting does not take effect.
Note
Some ATA 187 parameters are set from port 1 only. Setting the parameters from port 2 will have no
effect. Set the following parameters from port 1 only—IVR Password, Phone Load Name, CDP, and Web
Access.
effect. Set the following parameters from port 1 only—IVR Password, Phone Load Name, CDP, and Web
Access.
Table 4-2
Configuration Information
Configuration Window
Path
Enterprise Phone
Configuration window
Configuration window
System > Enterprise Phone Configuration
Common Phone Profile
window
window
Device > Device Settings > Common Phone Profile
Phone Configuration window Device > Phone; Product Specific Configuration portion of window
Table 4-3
Configuration Parameters for the ATA 187
Parameter
Description
Auto Barge
Auto Barge adds a user to an active call. An offhook phone
automatically adds the user (initiator) to the shared line call
(target), and the users currently on the call receive a tone (if
configured). Barge supports built-in conference and shared
conference bridges.
automatically adds the user (initiator) to the shared line call
(target), and the users currently on the call receive a tone (if
configured). Barge supports built-in conference and shared
conference bridges.
The Auto Barge feature allows the user to go offhook and be
added to the call. The Auto Barge feature supports built-in
conferences and shared conference bridges.
added to the call. The Auto Barge feature supports built-in
conferences and shared conference bridges.
Call Sequence
•
Bellcore FSK
•
ETSI FSK
Callee Connect Polarity
•
User forward polarity while callee is connected
•
User reverse polarity while callee is connected
Callee Disconnect Polarity
•
User forward polarity while callee is disconnected
•
User reverse polarity while callee is disconnected
Caller Connect Polarity
•
User forward polarity while caller is connected
•
User reverse polarity while caller is connected