Garmin 530HCx Manual De Usuario

B

aSIc

 o

peratIon

  NOte: If the headset has a PTT (Push to Talk) 

button, it must be pressed for the unit to detect the 

headset. 

VOX Level—controls the sensitivity level of any 

Voice Operated Transmission (VOX) accessory. 

VOX accessories allow you to use the unit hands-

free. A lower VOX setting is recommended for 

quiet environments whereas a higher VOX setting 

should be used in noisy environments. Setting 

the VOX level to 5 is recommended, but it can be 

necessary to adjust the level to achieve the voice 

trigger level. You can hear yourself talking in the 

headset when transmitting successfully using VOX.
Microphone Sensitivity—set the sensitivity of 

the internal microphone and the sensitivity of a 

headset microphone. When selected, a sensitivity 

adjustment slider appears. Adjusting the sensitivity 

requires the assistance of another radio user to 

advise of the voice quality received while adjusting 

the slider. 

Call tone—when the Call key is pressed, an 

attention tone is transmitted. Choose from 10 tones.
Roger tone—when the Talk key is released, a tone 

is sent to signify the end of the transmission. This 

option allows you to choose one of four tones, or 

set the tone to Off.
Ring tone—when an incoming transmission is 

received, an attention tone sounds. This option 

allows you to choose one of 10 tones or set the tone 

to Off. The Ring tone does not sound again until 

there has been 45 seconds of radio inactivity.
Vibrate—choose from On or Off to have the unit 

vibrate when an incoming transmission is received. 

Once received, the unit does not vibrate again until 

there has been 45 seconds of radio inactivity. The 

unit also vibrates at Power On when set to do so.
Message Beep—Choose from 19 options or off 

to have the unit emit a tone when a message is 

received.

•