Grundig GLCD2206HDV Manual De Usuario

 

- 13 -

 
2. Connect the audio sources (Including DVD, VCDR, etc.) to the proper 

AUDIO input jacks ‘L’ and ‘R’. 

3. Connect the video source to the VIDEO input jack by RCA cable. 
4. Connect the video source to the S-VIDEO input jack of the TV by the 

S-video cable   

5. Insert the AC power to the DC adaptor, then connect 12V input jack from 

the monitor to its DC output jack. 

6. When using the LCD as a computer screen, connect the PC from the VGA 

jack of the monitor by the relevant cable.   

   

IV. TV/Monitor Screen Operation 

 

1. Press 

the 

button on the unit or from the remote control to 

switch on the power. The power indicator will light up in blue colour. 
Press the STANDBY button again to switch off the power, and the 
indicator will change to red.   

2. Press 

the VOL - or VOL + button to adjust the volume level. Press the 

 button repeatedly to decrease the volume; press the VOL + button 

repeatedly to increase the volume from 0 to 100. 

 

1. Press 

the 

 button on the remote control to select the TV or DTV 

input mode. If you are using the receiver for the first time, an Installation 
Guide menu will be displayed to guide you through 

the channel scan, 

Use the remote control to finish channel scan (you can also refer to 
Chapter V in this manual for the channel scan operation).