Philips slvs400 Manual De Usuario
Connect the power adapter
D
1. Take the supplied power adapter (E).
2. Plug the connector into the DC 12V power
2. Plug the connector into the DC 12V power
connector on the transmitter (A).
3. Plug the adapter into the power outlet.
> The power light on the front comes on as red.
Preparation
A
1. Switch on the transmitter (A).
2. Switch on the video source.
3. Take these items:
2. Switch on the video source.
3. Take these items:
• Receiver
(B)
•
Remote control (C)
•
Remote control of a video source.
•
SCART cable (D)
•
Power adapter (E)
•
This quick start guide (F)
4. Go to TV2.
2
Connect receiver
AC
L
Channel
DC 12V
1 2 3 4
R
3
2
1
R
STANDBY
SELECT
SLV5400 WIRELESS TV LINK TRANSMITTER
1
Check the operation of TV1
E
1. Switch on TV1.
2. Switch on the connected video source.
3. Select the correct SCART input on TV1.
4. Check if TV1 shows the image of the video source.
2. Switch on the connected video source.
3. Select the correct SCART input on TV1.
4. Check if TV1 shows the image of the video source.
> The transmitter is connected correctly.
Firmly insert the SCART cables to the ports:
1. Plug the connector straight into the port.
2.Apply some force when you insert the connector.
1. Plug the connector straight into the port.
2.Apply some force when you insert the connector.