Gefen ext-hdboost-141 Manual De Usuario

page | 12

Operating the Booster for HDMI with EDID Detective

In order for the Booster for HDMI with EDID Detective to pass HDCP content (e.g. Blu-ray, 

etc.), DIP switch 4 must be set to the OFF (up) position.  This is the factory-default setting. 

 

In some cases, computers will enable HDCP if an HDCP-compliant display is detected. 

To force the computer to ignore detection of an HDCP-compliant display,  set DIP switch 4 

to the ON (down) position. 

HDCP can also be controlled using the 

 command. 

 

 

 

 

 

 

 

 

 

 

 

EDID Programming