Manual De UsuarioTabla de contenidosStep1 First, read the yellow caution label on the EPA. Figure1 shows a sample of this caution l...1Figure1 Locations of Labels and Reference Points on the EPA1Step2 Ensure that the connector guide pins are aligned, and mate the connector of the EPA to the...2Figure2 Mating the Connector of the EPA to the Line Card2Figure3 Side Views - Mating the Connector of the EPA to the Line Card2Step3 Ensure that the connector guide pins are aligned. Once the connector is engaged, apply gen...3Figure4 Press on the Rear Outer Corners of the EPA3Figure5 Rear Outer Corners of the EPA (Close-up)3Step4 Press gently on the white labels in middle of the outer edge of the EPA as shown in Figure...4Figure6 Press on the White Labels on the EPA4Step5 Use a Phillips screwdriver to insert and tighten the screw on the EPA, 3 to 5 in-lbs, as s...5Figure7 Inserting and Tightening the Screw on the EPA5Step6 Use a Phillips screwdriver to insert and tighten the two screws on the faceplate of the li...6Figure8 Inserting the 2 screws on the Faceplate of the Line Card6Tamaño: 1 MBPáginas: 7Language: EnglishManuales abiertas