Honeywell Liquid Cooled 45kW Home Standby Generator Manuales de usuario

Tabla de contenidos

• PAGE Low Oil Pressure Shutdown Alarm

  8
• INTRODUCTION

  1
• High Coolant Temperature Shutdown Alarm

  8
• Read this Manual Thoroughly

  1
• Overcrank Shutdown Alarm

  8
• Operation and Maintenance

  1
• Overspeed Shutdown Alarm

  8
• How to Obtain Service

  1
• RPM Ssensor Failure Shutdown Alarm

  8
• SAFETY RULES

  1
• Under-frequency Shutdown Alarm

  8
• IDENTIFICATION RECORD

  2
• Low Battery Alarm

  8
• Data Label

  2
• Low Battery Warning

  8
• EQUIPMENT DESCRIPTION

  3
• Low Coolant Level Alarm

  8
• Equipment Description

  3
• Missing Cam Pulse Alarm

  8
• Engine Oil Recommendations

  3
• Missing Crank Pulse Alarm

  8
• Coolant Recommendations

  3
• Low Fuel Pressure Warning

  8
• ENGINE PROTECTIVE DEVICES

  4
• Governor Sensor Fault Alarm

  8
• Engine Protective Devices

  4
• Wiring Error Alarm

  8
• High Coolant Temperature Sender

  4
• Undervoltage Alarm

  8
• Low Coolant Level Sensor

  4
• Overvoltage Alarm

  8
• Low Oil Pressure Switch

  4
• Internal Failure Shutdown Alarm

  8
• Overcrank Shutdown

  4
• Canbus Alarm

  8
• Overspeed Shutdown

  4
• Ignition Alarm

  8
• RPM Sensor Loss Shutdown

  4
• Maintenance Warning

  8
• DC Fuses

  4
• Alarm Cancel

  8
• FUEL SYSTEM

  5
• Common Alarm Relay

  8
• Fuel Requirements

  5
• Maintenance Alerts

  8
• Natural Gas Fuel System

  5
• Menu System

  8
• Propane Vapor Withdrawal Fuel System

  5
• OPERATION

  9
• LP Liquid Fuel System

  5
• Stationary Emergency Generator Control and Operation

  9
• SPECIFICATIONS

  6
• Operating Unit with Manual Transfer Switch

  9
• Stationarey Emergency Generator

  6
• Engine Start-up and Transfer

  9
• Engine

  6
• Retransfer and Shutdown

  9
• Cooling System

  6
• Operating Unit with Automatic Transfer Switch

  9
• Fuel System

  6
• MAINTENANCE

  10
• Electrical System

  6
• General Maintenance

  10
• Weather and Maintenance Kits

  6
• Check Engine Oil

  10
• Reconfiguring the Fuel System

  6
• Changing Engine Oil

  10
• Fuel System

  6
• Cooling Intake/Outlet

  10
• Control Panel

  6
• Inspect Cooling System

  10
• GENERAL INFORMATION

  7
• Engine Coolant

  10
• Alternator AC Lead Connections

  7
• Cooant Change

  10
• Four-lead, Single-phase Stator

  7
• Overload Protection for Engine DC Electrical System

  10
• Alternator Power Winding Connections

  7
• Exercise System

  10
• 3-phase Alternators ("Y" Configuration)

  7
• Perform Visual Inspection

  10
• 3-phase Alternators ("Delta" Configuration)

  7
• Inspect Exhaust System

  10
• CONTROL PANEL

  8
• Check Fan Belt

  10
• Control Panel Interface

  8
• Inspect Engine Governor

  10
• Using the Auto/Off/Manual Switch

  8
• Changing the Engine Air Filter

  10
• Activate the Generator

  8
• Spark Plugs

  10
• Display Interface Menus

  8
• Cam Sensor

  10
• Activation Chart

  8
• Battery Maintenance

  10
• Setting the Exercise Timer

  8
• Battery Replacement

  10
• Low Speed Exercise

  8
• Battery Fluid

  10
• User Adjustable Settings

  8
• Cleaning the Stationary Emergency Generator

  10
• Fuel Conversion

  8
• SERVICE SCHEDULE

  11
• Operation

  8
• Automatic Transfer Operation

  8
• Troubleshooting Guide

  12
• Sequence of Automatic Operation

  8
• EMISSIONS WARRANTY

  13
• Crank Cycles and Overcrank Shutdown

  8
• Auto Start

  8
• Manual Start

  8
• Alarm and Warning Messages

  8
• 3% for every 10° C above °C (45kW)

  25
• 1.65% for every 10° above °F (45kW)

  77
• 1% for every 100 m above m (45kW)

  183
• 3% for every 1000 ft. above ft. (45kW)

  600