SkyGolf SGX Manuel D’Utilisation

•  Green At:

Automatically switches to the IntelliGreen view when you reach a set distance. The default

to switch to IntelliGreen is 150 yards. You may adjust this setting from 50-500 yards.

•  Targets First:

Enabling this setting displays the target list from the tee first when you go to the next

hole (instead of displaying the IntelliGreen). The default setting is to display the IntelliGreen first.

•  Green Ref:

Sets the green target that you want to know the distance to when you make your approach

shot. When the Green Reference is set to “Front”, a small square will appear on the IntelliGreen where
the front is marked. The word “Front” will replace “Center” on target lists. The distance will be based
on the Front marker.

•  Green Targets:

Enable this option to display additional green targets (Example: Grn-RtCy, Grn-BackRt)

in the target list views.

System Settings offers additional configuration specific
to the operation of the SGX.

•  Factory:

 Resets  the  SGX  settings  to  the  factory

defaults when “Yes” is selected.

•  Joystick  Sel.:

 Allows  you  to  turn  the  selection

function  of  the  Joystick  ON  or  OFF.  When  set  to
“ON”, you can press the Joystick to select on-screen
options. When set to “OFF”, you must use the Left
and Right Keys to select options on the SGX.

Selecting the GPS icon on the Settings Menu will take you to a GPS Reset screen. The reset option will
reset the GPS receiver. This function may be used while troubleshooting with SkyGolf Customer Support or
if you notice that your satellite signal appears to be poor. Press the Right Key under “Yes” to proceed with
the reset, or the Left Key under “No” to exit without a reset.

Should you encounter any issues with the SGX, a SkyGolf
Customer Support representative may ask you to run the
Diagnostics tool. The Diagnostics tool will automatically
perform three tests: a LCD Test, a Backlight Test, and
a Button Test.

•  The

LCD Test

determines whether the SGX’s high-

resolution TFT-LCD display has dead pixels, a blank
screen, or other problems. The test will cause the
screen to display all black, then all white.

•  The

Backlight Test

checks the display’s backlight by

automatically scrolling through different brightness
levels in 10% increments.

•  The

Button Test

determines whether the SGX software recognizes keys when you press them. During

this test, every button you press should show the name of that key on the display. To exit this test,
press the Left Key twice.

Selecting this option on the Settings Menu will display the digital clock. Press the
Left Key beneath “Exit” to return to the previous screen.