Philips VRZ220AT Manuel D’Utilisation
SELECT op CHOOSE B
→
STATUS
[ON]
COUNTER ONLY
[OFF]
TO END PUSH EXIT
20 On-Screen Status Displays
• If the channel you select has no
broadcast, the screen will become
solid blue.
solid blue.
• You may not access a status display
when viewing a still picture, during
slow motion playback (VRZ250
only), or when the F.FWD/B or
REWIND/s button is pressed dur-
ing playback.
slow motion playback (VRZ250
only), or when the F.FWD/B or
REWIND/s button is pressed dur-
ing playback.
Helpful Hints
1
Press the MENU button.
A status display will appear when you press the STATUS/EXIT
button or certain function buttons. The contents of the status dis-
play will vary. To choose the status display mode, follow the steps
below.
If you select STATUS ON, then select COUNTER ONLY
ON:
button or certain function buttons. The contents of the status dis-
play will vary. To choose the status display mode, follow the steps
below.
If you select STATUS ON, then select COUNTER ONLY
ON:
●
Whenever you press the STOP/p button or the PLAY/o but-
ton, the status display will appear for five seconds. After five
seconds, only the counter will remain on-screen. You must
press the STATUS/EXIT button to remove it.
ton, the status display will appear for five seconds. After five
seconds, only the counter will remain on-screen. You must
press the STATUS/EXIT button to remove it.
If you select STATUS ON, then select COUNTER ONLY
OFF:
●
Whenever you press the STOP/p button or the PLAY/o but-
ton, the status display will appear for five seconds.
ton, the status display will appear for five seconds.
If you select STATUS OFF:
●
The status display will not appear when you press function but-
tons. You must press the STATUS/EXIT button to see the sta-
tus display.
tons. You must press the STATUS/EXIT button to see the sta-
tus display.
2
Press the PLAY/o button or the STOP/p button to select
VCR SET UP, then press the F.FWD/B button.
VCR SET UP, then press the F.FWD/B button.
3
Press the PLAY/o button or the STOP/p button to select
ON SCREEN MODE, then press the F.FWD/B button.
ON SCREEN MODE, then press the F.FWD/B button.
5
If you set STATUS to OFF, go to step 6. If you set STA-
TUS to ON, press the PLAY/o button or the STOP/p
button to select COUNTER ONLY, then press the
F.FWD/B button so that OFF (or ON) appears beside it.
TUS to ON, press the PLAY/o button or the STOP/p
button to select COUNTER ONLY, then press the
F.FWD/B button so that OFF (or ON) appears beside it.
6
Press the STATUS/EXIT button.
4
Press the PLAY/o button or the STOP/p button to select
STATUS, then press the F.FWD/B button so that OFF
(or ON) appears beside STATUS.
STATUS, then press the F.FWD/B button so that OFF
(or ON) appears beside STATUS.
Button
Pressed
Pressed
Time
MTS
Broadcast
Available
(VRZ250 only)
Broadcast
Available
(VRZ250 only)
Counter
and
Counter
Memory
and
Counter
Memory
Tape
Speed
Speed
STOP
12:00 AM
TV STEREO
CH10
STEREO
2ND AUD
2ND AUD
SLP
M 1:23:45
HIFI
Status Display
(example only)
Receiving and
Recording Mode
(VRZ250 only)
Recording Mode
(VRZ250 only)
Channel
Audio
Out
Mode
(VRZ250 only)
Out
Mode
(VRZ250 only)
VRZ220/250 layout 4/8/99 10:11 PM Page 20