Seiko 5d88 Manuel D’Utilisation
English
English
u
Some models may have a crown with a special structure as illustrated
below. Refer to the following instructions when operating this type of
crown, as it should be operated in a different way from that of ordinary
ones.
CROWN WITH DRIVING WHEEL
To pull out the crown, pull out the A portion
(crown).
To turn the crown, turn the
B portion (driving
wheel).
Normal position
First click position
Second click position
Driving wheel
Crown
A
B
A
B
HOW TO CHARGE AND START THE WATCH
1. Turn the crown clockwise repeatedly to charge
the watch.
. After electric power generation by turning the
crown continues for a certain period, the direct
drive indicator hand moves to point at scale
marking 0 and the second hand starts moving.
Make sure to stop turning the crown to check it.
✽
The manual winding mechanism for generating the
electric power functions when the crown is turned
clockwise. The watch can also be charged when the
crown is turned in a reciprocating motion.
✽
When the watch is completely stopped, the direct
drive indicator hand points at scale marking 1 under
the 0 position (standby position).
✽
If the second hand does not move even though the
crown is turned, turn the crown more quickly.
✽
If the watch has been left untouched for several years,
the second hand starts moving in 2-second intervals
after the crown is turned. This is not a malfunction.
Charge the watch by turning the crown until the direct
drive indicator hand moves from the standby position to
the 0 position. It may take approximately 5 to 6 minutes.