Datalogic Scanning D8330 Manuel D’Utilisation
CONFIGURATION
25
4.1.4
Sending Configuration Strings from Host
An alternative configuration method is provided in Appendix A using the RS-232
interface. This method is particularly useful when many devices need to be
configured with the same settings. Batch files containing the desired parameter
settings can be prepared to configure devices quickly and easily.
interface. This method is particularly useful when many devices need to be
configured with the same settings. Batch files containing the desired parameter
settings can be prepared to configure devices quickly and easily.
4.2
SETUP PROCEDURES
For PowerScan
®
D8330 Series readers, follow the setup procedures in pars. 4.3, and
For PowerScan
®
M8300 Series readers, the setup procedures depend on two basic
applications, Stand-alone or STAR-System™.
Stand-alone applications allow communication with the Host by either the BC-80X0
cradle (par. 4.5), or by the STAR-Modem™ radio modem (par. 4.5.2).
cradle (par. 4.5), or by the STAR-Modem™ radio modem (par. 4.5.2).
STAR-System™ applications allow communication with the Host through an
RS-485 network by the STARGATE™ RF base station or by the BC-8000 cradle
(par. 4.6 and par. 4.7).
RS-485 network by the STARGATE™ RF base station or by the BC-8000 cradle
(par. 4.6 and par. 4.7).
Proceed as shown in the following diagram:
Begin Setup by choosing the setup
procedure for your PowerScan
®
reader as indicated below.
End of Setup
Your reader is now ready to read
barcodes using the default settings.
Stand Alone Applications
PowerScan
®
M8300/BC-80X0
Par. 4.4
Par. 4.7
Par. 4.7
Optional Par. 4.4.1
multiple readers per BC-8000
PowerScan
®
M8300/STAR-Modem™
in Stand Alone Mode
Par. 4.4.2
PowerScan
®
D8330
Par. 4.3
Par. 4.7
Par. 4.7
STAR-System™ Network Applications
BC-8000
Par. 4.6
STAR-System™ Applications
PowerScan
®
M8300/STAR-System™
Par. 4.5
•
STARGATE™
•
BC-8000 Network
•
STAR-Modem™ in STAR-System™ Mode