ARRI 416 Manuel D’Utilisation

The Split Bridge Plates facilitate balancing of the camera on 

the tripod and elevate the 416 to proper height for the 

mounting of accessories. They separate into two pieces to 

allow you to quickly change between tripod and hand-held 

operation. The BP-10 

a

 is designed for 19 mm 

support rods, the BP-11 for 15 mm support rods. The 

bridge plates consist of the Accessory Carrier, the Sled, 

the Base Plate and a pair of 240 mm long Support Rods

19 mm Support rods with lengths of 165 mm, 185 mm, 

340 mm and 440 mm or 15 mm diameter support rods 

with lengths of 340 mm and 440 mm are available 

separately as options.

•  Separate the Accessory Carrier from the Sled 

a

.

•  Engage the two cylindrical pins on the Accessory 

Carrier with the corresponding holes in the camera 

base then fasten it 

a

 with the slotted screw to 

the 3/8-16 threaded hole in the camera base. The 

clamping lever of the Accessory Carrier will be on the 

camera right side.

•  Screw the Wedge Plate for Base Plate onto the Base 

Plate of the tripod and lock onto the tripod head.

base plate

support rods

sled

accessory carrier

clamping lever

spring loaded catch

spring loaded pin

cylindrical pins

clamping lever

dove tail guide