ARRI 416 Manuel D’Utilisation

•  Using the “MODE“ key 

a

, switch to Mode 4 

(Timecode time).

•  Depress the “SET“ key 

a

 for approx. 3 s until 

the “TC“ symbol appears or disappears on the display.

When the camera is first turned on without a previously set 

valid Timecode remaining in the buffer, the Timecode clock 

starts running from time 00:00:00:00, with the User Bits set 

to 00000000. This happens regardless of whether TC is 

turned on or not. TC time can only be set by the master clock. 

User Bits can be set either by the master clock or entered 

manually with the camera display. If TC is turned on but not 

set by external synchronization, a warning will be displayed.

If a speed is set on the camera which does not correspond 

to TC, the TC generator retains the most recently set frame 

rate. While Timecode is in use and the speed is changed 

from one to another valid Timecode speed, the “TC“ symbol 

on the display goes off for approx. 1 s and reappears once 

the TC generator is ready.

MODE button

SEL / SET buttons