ARRI 416 Manuel D’Utilisation

Both CLM-1 and CLM-2 motors can be used with the 

ARRIFLEX 416 Plus.

•  CLM-1 motors should be daisy-chained in series with one 

of the end motors connected to either (but not both) of 

the 416 Plus LCS bus connectors 

a

.

•  CLM-2 motors should be connected, according to their 

position on the lens, to the Zoom, Focus and Iris 

connectors of the 416 Plus 

a

.

•  CLM-1 and CLM-2 motors may be used simultaneously 

but only on different lens axes. 

In the situation where a CLM-1 is assigned to Focus and a 

CLM-2 is simultaneously plugged into the Focus connector, 

the CLM-1 will have priority and the CLM-2 connection will 

be deactivated. The same applies to the Zoom and Iris axes.

Each CLM-2 motor connection has a direction switch 

a

 and a status LED 

a

.

•  Use the direction switch to change the direction of 

rotation of the attached motor.

LCS bus connectors

status LED

direction switch

Zoom

Focus

Iris