ARRI 416 Manuel D’Utilisation

The 416 Standard Camera Handle can be extended with 

the Handle Extension Block HEB-1 

a

. The Handle 

Extension Block can be mounted to any of the 3/8-16 holes 

by first placing the 2 pins 

a

 into the corresponding 

pin holes on the handle and then fastening the extension 

block screw 

a

 inside the extension block by using 

a long 5mm Allen key. Note that the viewfinder cannot be 

swung over to the camera right side when the Handle 

Extension Block is attached to the front of the 416 

Standard Camera Handle.

Note: 

The 416 Standard Camera Handle is positioned 

in the centre of gravity for a typical configuration.

A flat base with diverse attachment points for use when 

attaching the 416 to a Steadicam plate or other flat surface. 

Useful when working with Lightweight Support LWS-5, in 

order to have LWS-5 clear the mounting surface. Useful 

since 416 bottom threads are not compatible with some 

Steadicam plates. Also useful in situations requiring 

additional mounting security.

handle extension block HEB-1

block screw

pins