ARRI 416 Manuel D’Utilisation

•  Turn the shutter tool to set the shutter to the desired 

shutter opening. The shutter is held in its preset 

positions by a sprung-ball, which can be felt as the 

shutter is adjusted. Make sure the shutter registers 

properly at the set opening.

•  Remove the shutter tool and film track cleaning rod

•  Holding the “PHASE” button pressed in Standby will 

make the camera inch forward.

•  During this the display shows the measured shutter 

angle in the upper line. The lower line displays the 

voltage of the power supply or the percentage of 

remaining battery capacity or the number of magazine 

rolls left.

phase button