Fujifilm F710 Manuel D’Utilisation
63
Advanced
Features
3
62
Ｐ
２５０
２５０ Ｆ５．６
Ｆ５．６
Ｐ
１９
１９
2
0
1
0
2
j BRACKETING
Available Photography mode:
Use this setting to photograph the same image with
different exposure settings. Bracketing shoots 3
continuous frames, one of which is correctly
exposed while the remaining two are underexposed
and overexposed respectively by a set amount.
h Bracketing settings (3)
different exposure settings. Bracketing shoots 3
continuous frames, one of which is correctly
exposed while the remaining two are underexposed
and overexposed respectively by a set amount.
h Bracketing settings (3)
±1/3 EV, ±2/3 EV, ±1 EV
See P.125 for more information on EVs.
See P.125 for more information on EVs.
●
!
If the underexposed or overexposed frame is outside the
camera’s control range, the shot is not taken with the
specified setting increments.
camera’s control range, the shot is not taken with the
specified setting increments.
●
!
Flash photography cannot be used.
●
!
This feature always takes 3 shots. However, if there is insufficient
space on the xD-Picture Card for 3 shots, no picture will be taken.
space on the xD-Picture Card for 3 shots, no picture will be taken.
±２／３ ＥＶ
±２／３ ＥＶ
±１ ＥＶ
±１ ＥＶ
ＢＲＡＣＫＥＴＩＮＧ
ＢＲＡＣＫＥＴＩＮＧ
±１／３ ＥＶ
±１／３ ＥＶ
1
Use this setting to soften or emphasize outlines or
to adjust the image quality.
HARD
to adjust the image quality.
HARD
: Emphasizes the outlines.
Best for shots of subjects such as buildings
or text where sharp images are desirable.
or text where sharp images are desirable.
SOFT
: Softens the outlines.
Best for shots of subjects such as people,
where a softer image is desirable.
where a softer image is desirable.
NORMAL : Best for ordinary photography.
Provides edge sharpness that is ideal
for ordinary shots.
for ordinary shots.
ＳＨＡＲＰＮＥＳＳ
ＳＨＡＲＰＮＥＳＳ
ＨＡＲＤ
ＨＡＲＤ
ＳＯＦＴ
ＳＯＦＴ
ＮＯＲＭＡＬ
ＮＯＲＭＡＬ
G SHARPNESS
Available Photography mode:
Use this setting to change just the amount of light
emitted by the flash to suit the photography
conditions or to achieve a desired effect.
h Compensation range: ±2 levels
emitted by the flash to suit the photography
conditions or to achieve a desired effect.
h Compensation range: ±2 levels
–0.6 EV to +0.6 EV in approx. 0.3 EV increments
(total: 5 levels selectable)
See P.125 for information on EVs.
(total: 5 levels selectable)
See P.125 for information on EVs.
●
!
Depending on the type of subject and the shooting distance,
brightness adjustment may have no effect.
brightness adjustment may have no effect.
●
!
The image may appear dark when the shutter speed is set to
speeds higher than 1/1000 sec.
speeds higher than 1/1000 sec.
−０．３
−０．３
−０．６
−０．６
±０
±０
＋０．３
＋０．３
ＦＬＡＳＨ
ＦＬＡＳＨ
z FLASH BRIGHTNESS ADJUSTMENT
Available Photography mode:
Near
Far
２５０
２５０ Ｆ５．６
Ｆ５．６
Ｐ
１９
１９
ＳＥＬＥＣＴ ＡＦ ＡＲＥＡ
ＳＥＬＥＣＴ ＡＦ ＡＲＥＡ
After moving
Before moving
2
The AF frame appears in the location to which the
target point was moved.
Take the picture in the normal way.
To reposition the AF frame, repeat step
target point was moved.
Take the picture in the normal way.
To reposition the AF frame, repeat step
1
.
1
AF (AREA)
The camera changes the focusing position on the
LCD monitor. Use this setting when composing the
shot using a tripod and you require to change the
focusing position.
1 Hold down the “C-AF” button.
2 Press “a”, “b”, “d” or “c” to move the “
LCD monitor. Use this setting when composing the
shot using a tripod and you require to change the
focusing position.
1 Hold down the “C-AF” button.
2 Press “a”, “b”, “d” or “c” to move the “
”
(target point) to the focusing position.
3 Release the “C-AF” button.
0
1
0
2
0
3
MF (Manual Focus)
1 Hold down the “C-AF” button.
2 Turn the Command dial to adjust the focus.
2 Turn the Command dial to adjust the focus.
Use the LCD monitor to check the focus.
0
1
0
2
２５０
２５０ Ｆ５．６
Ｆ５．６
Ｐ
１９
１９
Moves the focus further.
Moves the focus closer.
STILL PHOTOGRAPHY MENU
STILL PHOTOGRAPHY MENU
Regardless of the AF frame location, the exposure is always set using the area in the center of the
LCD monitor. To expose the shot for your main subject, use AE lock.
LCD monitor. To expose the shot for your main subject, use AE lock.
◆
Mastering Manual Focusing
◆
Use a tripod to prevent the image from becoming
unfocused when the camera moves.
unfocused when the camera moves.
◆
One-touch AF Function
◆
Use this function to focus the shot quickly.
1
Hold down the “C-AF” button.
2
Press the shutter button down halfway to focus
the shot using Autofocus.
the shot using Autofocus.
Bebeep
0
1
0
2
✽ Displaying the menus (➡P.57)
After setting the exposure for BRACKETING:
1 Hold down the “
1 Hold down the “
f
” Continuous shooting button.
2 Turn the Command dial to select “
j
”
BRACKETING.
Auto bracketing