Fujifilm F710 Manuel D’Utilisation
111
Viewing
Images
6
ＵＳＢ
ＵＳＢ
ＣＨＥＣＫＩＮＧ ＵＳＢ
ＣＨＥＣＫＩＮＧ ＵＳＢ
●
!
The camera cannot be used to specify printer settings such
as the paper size and print quality.
as the paper size and print quality.
●
!
Use an xD-Picture Card that was formatted on the camera.
1 Set the “USB/PLAY” switch on the cradle to the
“USB” position.
2 Press the “POWER” button on the cradle.
3
0
1
0
2
2
1 Connect the cradle to the printer using the USB
cable.
2 Set the camera into the cradle.
●
!
“PRINT WITH DATE” is not available when the camera is
connected to a printer that does not support date printing.
connected to a printer that does not support date printing.
5
1 Press “a” or “b” to select “PRINT WITH DATE”
or “PRINT WITHOUT DATE”. If “PRINT WITH
DATE” is selected, the date is imprinted on your
prints.
DATE” is selected, the date is imprinted on your
prints.
2 Press the “MENU/OK” button.
ＳＥＴ
ＳＥＴ
ＯＫ
ＯＫ
ＰＩＣＴＢＲＩＤＧＥ
ＰＩＣＴＢＲＩＤＧＥ
ＰＲＩＮＴ ＷＩＴＨ ＤＡＴＥ
ＰＲＩＮＴ ＷＩＴＨ ＤＡＴＥ
ＰＲＩＮＴ ＷＩＴＨＯＵＴ ＤＡＴＥ
ＰＲＩＮＴ ＷＩＴＨＯＵＴ ＤＡＴＥ
ＰＲＩＮＴ ＤＰＯＦ
ＰＲＩＮＴ ＤＰＯＦ
0
1
0
2
4
“
‘
” appears and then the menu
screen is displayed.
●
!
If the menu screen does not appear, check whether the “USB
MODE” setting is
MODE” setting is
“
ˆ
”.
●
!
Depending on the printer, some functions are disabled.
110
Always press the “MENU/OK” button to complete
the settings.
the settings.
●
!
Press the “DISP (BACK)” button to return to step
5
.
6.4.2 Specifying images for printing without using DPOF (single-frame printing)
6.4 CONNECTING THE CAMERA DIRECTLY TO THE PRINTER FOR
PRINTING IMAGES (PictBridge FUNCTION)
Press the “MENU/OK” button to download the data
to the printer and print the frames specified in the
DPOF settings.
To end printing, press the “DISP (BACK)” button.
to the printer and print the frames specified in the
DPOF settings.
To end printing, press the “DISP (BACK)” button.
●
!
Press the “DISP(BACK)” button to cancel the printing.
Depending on the printer, the printing may not be canceled
immediately or printing may stop mid way through. When
printing stops mid-way, briefly turn the camera off and then
on again.
Depending on the printer, the printing may not be canceled
immediately or printing may stop mid way through. When
printing stops mid-way, briefly turn the camera off and then
on again.
5
1 Press “a” or “b” to select “
u
PRINT DPOF”.
2 Press the “MENU/OK” button.
●
!
When
“
”
appears, the DPOF settings are
not specified.
●
!
To use DPOF printing, the DPOF settings must be specified
on FinePix F710 beforehand (
on FinePix F710 beforehand (
➡P.76).
●
!
Even when “WITH DATE” is specified in the DPOF settings,
the date is not inserted on printers that do not support date
printing.
the date is not inserted on printers that do not support date
printing.
ＳＥＴ
ＳＥＴ
ＯＫ
ＯＫ
ＰＩＣＴＢＲＩＤＧＥ
ＰＩＣＴＢＲＩＤＧＥ
ＰＲＩＮＴ ＷＩＴＨ ＤＡＴＥ
ＰＲＩＮＴ ＷＩＴＨ ＤＡＴＥ
ＰＲＩＮＴ ＷＩＴＨＯＵＴ ＤＡＴＥ
ＰＲＩＮＴ ＷＩＴＨＯＵＴ ＤＡＴＥ
ＰＲＩＮＴ ＤＰＯＦ
ＰＲＩＮＴ ＤＰＯＦ
0
1
0
2
●
!
Do not connect to a PC when the “USB MODE” setting is set
to “
to “
ˆ
”. Refer to P.121 if you connect to PC by mistake.
1
1 Slide the Power switch to the side to turn the
camera on.
2 Set the “USB MODE” setting in the “SET-UP”
menu to “
ˆ
” (
➡P.85).
3 Slide the Power switch to the side to turn the
camera off.
ＳＥＴ−ＵＰ
ＳＥＴ−ＵＰ
２
１
３
４
ＵＳＢ
ＵＳＢ ＭＯＤＥ
ＭＯＤＥ
ＣＣＤ−ＲＡＷ
ＣＣＤ−ＲＡＷ
：ＯＦＦ
ＯＦＦ
ＦＲＡＭＥ
ＦＲＡＭＥ ＮＯ．
ＮＯ．
言語
言語
／ＬＡＮＧ．
／ＬＡＮＧ．
：ＥＮＧＬＩＳＨ
ＥＮＧＬＩＳＨ
：ＣＯＮＴ．
ＣＯＮＴ．
：
ＳＥＴ
ＳＥＴ
ＣＡＮＣＥＬ
ＣＡＮＣＥＬ
ＯＫ
ＯＫ
ＢＡＣＫ
ＢＡＣＫ
0
1
0
3
0
2
6
ＯＫ
ＯＫ
ＢＡＣＫ
ＢＡＣＫ
ＹＥＳ
ＹＥＳ
ＣＡＮＣＥＬ
ＣＡＮＣＥＬ
ＴＯＴＡＬ／
ＴＯＴＡＬ／ １ＳＨＥＥＴＳ
１ＳＨＥＥＴＳ
ＰＲＩＮＴ
ＰＲＩＮＴ ＤＰＯＦ
ＤＰＯＦ ＯＫ？
ＯＫ？
ＰＲＩＮＴ ＤＰＯＦ
ＰＲＩＮＴ ＤＰＯＦ
7
ＢＡＣＫ
ＢＡＣＫ
ＣＡＮＣＥＬ
ＣＡＮＣＥＬ
１／
１／ １ＳＨＥＥＴＳ
１ＳＨＥＥＴＳ
ＰＲＩＮＴＩＮＧ
ＰＲＩＮＴＩＮＧ
ＰＲＩＮＴ ＤＰＯＦ
ＰＲＩＮＴ ＤＰＯＦ