Fujifilm F710 Manuel D’Utilisation

117

■ Image Memory Card

h This Image Memory Card is a new image recording

media (xD-Picture Card) developed for digital
cameras. The Image Memory Card consists of a
semiconductor memory (NAND-type flash memory)
to record digital image data.
The recording process is electrically performed and
enables erasure of existing image data as well as re-
recording of new image data.

h When using a new Memory Card, or a Memory Card

that has been formated by a PC, be sure to format
the card with your digital camera before using it.

■ Protecting Your Data

h Images and movies may be lost or destroyed in the

following situations. Please note that FUJIFILM
assumes no responsibility for data that is lost or
destroyed.
1. Removal of the memory card or turning the power

off while the memory card is being accessed (i.e.,
during record, erase, initialization, and playback
operations).

2. Improper handling and use of the memory card by

the user or third party. 

h Save your important data to another media (i.e., MO

disk, CD-R, hard disk, etc.).

■ Handling xD-Picture Card

h When storing xD-Picture Cards, make sure that they

are kept out of the reach of children. An xD-Picture
Card could be swallowed cause suffocation. If a child
swallows an xD-Picture Card, seek medical
attention or call emergency number right away.

h When inserting the xD-Picture Card into the camera,

hold the xD-Picture Card straight as you push it in.

h xD-Picture Card are precision electronic devices.

Do not bend, drop or otherwise subject the xD-
Picture Card to strong force or shocks.

h Do not use or store xD-Picture Card in hot humid

places or in places where they are exposed to
corrosive substances.

h Clean the xD-Picture Card with a soft dry piece of

cloth when dirty.

h When carrying or storing an xD-Picture Card, keep

it in the special protective case.

h The xD-Picture Card will work well for long time, but

will sooner or later lose its ability to store and play
back images or movies. If this happens replace it
with a new xD-Picture Card.

h Never remove the xD-Picture Card or turn the

camera off during data recording or erasing (xD-
Picture Card formatting) as this could be damaged
to the xD-Picture Card.

h The use of xD-Picture Cards is recommended with

the FinePix F710.
The recording quality cannot be guaranteed when
an xD-Picture Card other than those manufactured
by FUJIFILM are used.

h The  xD-Picture Card may feel warm when it is

removed from the camera after taking pictures. This
is normal.

h Do not put labels on the xD-Picture Card. Peeling

labels can cause the camera not to work properly.

■ Using xD-Picture Card with a PC

h When you take pictures using an xD-Picture Card

that has been used on a PC, reformat the xD-
Picture Card using your camera for best quality.

h When you format an xD-Picture Card, a directory

(folder) is created. Image data is then recorded in
this directory.

h Do not change or delete the directory (folder) or file

names on the xD-Picture Card because this will
make it impossible to use the xD-Picture Card in
your camera.

h Always use the camera to erase image data on an

xD-Picture Card.

h To edit image data, copy the image data to the PC

and edit the copy.

h Do not copy files other than those that will be used

by the camera.

■ Specifications

Type

Image memory card for digital
cameras (xD-Picture Card)

Memory type

NAND-type flash memory

Conditions for use

Temperature: 
0°C to +40°C 
(+32°F to +104°F)
Humidity: 
80% max. (no condensation)

Dimensions

25 mm 

× 20 mm × 2.2 mm

(0.98 in. 

× 0.79 in. × 0.09 in.) 

(W 

× H × D)

116

■ Handling the Battery

h Do not carry or store battery with metal objects such as

necklaces or hairpins.

h Do not heat the battery or throw it into a fire.
h Do not attempt to take apart or change the battery.
h Do not recharge the battery with chargers other those

specified.

h Dispose of used battery promptly.

h Do not drop the battery or otherwise subject it to strong

impacts.

h Do not expose the battery to water.

h Always keep the battery terminals clean.
h Do not store battery in warm or humid places. Storing the

battery for long periods in a hot location can shorten the
battery life.

■ Specifications of the included NP-40

Nominal voltage

DC 3.7V

Nominal capacity

710 mAh

Operating temperature

0°C to +40°C (+32°F to +104°F)

Dimensions

35.3 mm 

× 40 mm × 6 mm

(1.39 in. 

× 1.6 in. × 0.24 in.)

(W 

× H × D)

Mass (Weight)

Approx. 20g (0.7 oz.)

✽ These specifications are subject to change without notice.

Always use the AC Power Adapter AC-5VW with your
FinePix F710 Digital Camera. The use of other AC power
adapters may result in damage to your camera.
h Use the AC Power Adapter for indoor use only.
h Plug the connection cord plug securely into the DC input

terminal of the FUJIFILM Digital camera.

h Turn off the FUJIFILM Digital camera before disconnecting the

cord from the FUJIFILM Digital camera’s DC input terminal. To
disconnect, pull out the plug gently (Do not pull on the cord).

h Do not use the AC power adapter with any device other

than your camera.

h During use, the AC power adapter will become hot to the

touch, but this is normal.

h Do not take apart the AC power adapter. Doing so could

be dangerous.

h Do not use the AC power adapter in a place with hot

humid place.

h Do not subject the AC power adapter to strong shocks.
h The AC power adapter may emit a humming. But this is

normal.

h If used near a radio, this device may cause static, if this

happens move the camera away from the radio.

✽ Very occasionally, DC output will be prevented by the

operation of the internal protection circuit. In this event,
unplug the AC power adapter AC-5VW from the power
socket for a few moments and then plug it in again. This
will restore DC output.

■ Specifications (AC-5VW)

Power Supply

AC 100V to 240V,50/60Hz

Rated Input Capacity

13W(U.S.A.and Canada)
0.08A to 0.2A(other countries) 

Rated Output

DC 5.0V 1.5A

Temperature During Use

0°C to +40°C (+32°F to +104°F)

Storage Temperature

–10°C to +70°C
(+14°F to +158°F)

Dimensions (MAX.)

40 mm 

× 21 mm × 79 mm

(1.6 in. 

× 0.8 in. × 3.1 in.)

(W 

× H × D)

Mass (Weight)

Approx. 110 g (3.9 oz.) 
(excluding power cord)

✽ These specifications are subject to change without notice.

To reduce the risk of fire or electric shock, do not expose the AC power adapter to rain or moisture.
The AC power adapter should not be exposed to dripping or splashing and that no
objects filled with liquids, such as vases, should be placed on the AC power adapter.

hRead these instructions.
hKeep these instructions.
hHeed all warnings.
hFollow all instructions.
hDo not use this apparatus near water.
hClean only with dry cloth.
hDo not block any ventilation openings,

Install in accordance with the
manufacturer’s instructions.

hDo not install near any heat sources

such as radiators, heat registers,
stoves, or other apparatus (including
amplifiers) that produce heat.

hProtect the power cord from being

walked on or pinched particularly at

plugs, convenience receptables, and the
point where they exit from the apparatus.

hOnly use attachments/accessories

specified by the manufacturer.

hUnplug this apparatus during lightning storms

or when unused for long periods of time.

hRefer all servicing to qualified service

personal.
Servicing is required when the apparatus
has been damaged in any way, such as
power-supply cord or plug is damaged,
liquid has been spilled or objects have
fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not
operate normally, or has been dropped.