Fujifilm F100fd Manuel D’Utilisation

83

C Point the camera’s infrared port towards the front of the 

camera’s infrared port (

➝p.12). Transmission distance 

is about 5 to 20 cm (2 to 7.9 in.) within approx. 15°.

• Check that your camera is turned on when transmitting 

the image data.

• If the image is 3:2 ratio, white lines may appear at the 

top and bottom or right and left of the print, depending 
on the printer type.

• Movie images cannot be printed.
• Images photographed with a camera 

 other than 

FinePix F100fd may not be printed or transmitted.

• If the [QUALITY] of sending image data is over 3, 

[QUALITY] of the image will be set to 3.

• You can send the image data by simply pressing p 

three times.

• Refer to the manual provided with the receiving device 

for more information.

Receiving the image data from a FUJIFILM digital camera 
is shown as an example here. You can receive data from 
another device in the same way.

A Turn the camera on.

D Press p to begin transmission.

When transmission is completed, 
[TRANSMISSION COMPLETED] will 
appear on the LCD monitor.

15˚

15˚

5~20 cm

(Angle: up to approx. 15°)

B Press p or q to select the sending frame 

(file).

Setting the menu (

➝p.81)

Continued Q