Fujifilm FinePix 3800 Manuel D’Utilisation
96
Digital
(USB) socket
Camera
DC IN 5V
socket
socket
PC
(USB)socket
ＯＫ
ＢＡＣＫ
ＰＯＷＥＲ ＳＡＶＥ
ＤＡＴＥ／ＴＩＭＥ
ＵＳＢ ＭＯＤＥ
ＵＳＢ ＭＯＤＥ
ＯＦＦ
ＳＥＴ
ＳＥＴ−ＵＰ
ＳＥＴ−ＵＰ
ＰＯＳＴＶＩＥＷ
ＰＯＳＴＶＩＥＷ ＯＮ
ＤＳＣ
1. Load an xD-Picture Card containing
photographed images into your camera.
2. Slide the Power switch to the side to turn
the camera on.
3. Set the “USB MODE” setting in the “SET–
UP” menu to “DSC” (
➡P.80, 81).
4. Slide the Power switch to the side to turn
the camera off.
✽You should use the AC power adapter (sold
separately) the camera is connected to your PC
(
(
➡P.95). Loss of power during data transmission can
prevent successful data downloading.
5. Switch your PC on.
6. Use the special USB cable to connect the
6. Use the special USB cable to connect the
camera to your computer.
7. Switch the camera on.
Always use the prescribed procedure when
disconnecting or switching off the camera
(
disconnecting or switching off the camera
(
➡P.102).
If you are using a Windows PC, the driver settings
are specified automatically when installation is
completed. No further action is required.
are specified automatically when installation is
completed. No further action is required.
✽On Windows XP and Mac OS X, you must specify the
automatic launch settings the first time you connect
the camera to your computer.
the camera to your computer.
✽Take care to ensure that the special USB cable is
connected the correct way around and that the plugs
are pushed fully into the connection sockets.
are pushed fully into the connection sockets.
7.2 Use at DSC mode