Fujifilm FinePix F401 Manuel D’Utilisation
30
USING THE ZOOM
q
/
T
MODE
2
31
e
MACRO (CLOSE-UP) PHOTOGRAPHY
q
MODE
Optical
zoom
Digital
zoom
Zoom bar display
You can operate the optical zoom using the zoom
buttons. You can also use the digital zoom when
the resolution setting is “2”, “1”, “!” or “MOVIE”
(# or $). However, this only applies when you
are using the LCD monitor to take pictures.
buttons. You can also use the digital zoom when
the resolution setting is “2”, “1”, “!” or “MOVIE”
(# or $). However, this only applies when you
are using the LCD monitor to take pictures.
h Digital zoom focal distance
(35mm camera equivalent)
2: Approx. 114 mm to 164 mm
Maximum zoom scale: 1.44
×
1: Approx. 114 mm to 205 mm
Maximum zoom scale: 1.8
×
!: Approx. 114 mm to 410 mm
Maximum zoom scale: 3.6
×
#: Approx. 38 mm to 137 mm
Maximum zoom scale: 3.6
×
$: Approx. 38 mm to 274 mm
Maximum zoom scale: 7.2
×
●
!
You cannot use the digital zoom for resolutions of “3”.
●
!
The digital zoom cannot be used in high-sensitivity
photography (f800, 1600).
photography (f800, 1600).
●
!
See P.44, 55 for information on changing the file size
setting.
setting.
●
!
If the image goes out of focus when you use the
zoom, press the shutter button down halfway to
refocus.
zoom, press the shutter button down halfway to
refocus.
●
!
The optical zoom is equivalent to approximately
38 mm-114 mm on a 35 mm camera.
38 mm-114 mm on a 35 mm camera.
The position of the “
■
” on the zoom bar indicates
the current zoom setting.
hIf the “
■
” is above the dividing line, the digital
zoom is being used. If it is below the line, the
optical zoom is being used,
optical zoom is being used,
hPress “
P
(a)” or “
{
(b)” to move the “
■
”.
hWhen you switch between digital zoom and
optical zoom, the “
■
” stops moving. Press the
button for the same direction again to start the
“
“
■
” moving again.
４９
４９
Selecting Macro mode allows you to take close-
up shots.
up shots.
●
Effective Photography Range:
Approx. 10 cm to 80 cm (3.9 in to 31.5 in.).
Approx. 10 cm to 80 cm (3.9 in to 31.5 in.).
●
!
The LCD monitor automatically switches on.
●
!
You cannot switch the LCD monitor off.
●
!
When you cancel Macro mode, the LCD monitor
remains on.
remains on.
1 Set the Mode switch to “
q
”.
2 Press the “
e
” Macro button (d). The “
e
” icon
appears on the LCD monitor indicating that you
can take close-up shots.
To cancel Macro mode, press the “
can take close-up shots.
To cancel Macro mode, press the “
e
” Macro
button (d) again.
●
!
Macro photography is automatically cancelled in the
following situations:
following situations:
• When you have switched photography modes.
• When the camera is switched off.
• When the camera is switched off.
●
!
When you set the mode, the “
e
” icon is briefly
displayed larger.
●
!
To fire the flash, press “c” and select “z” Forced
Flash or “
Flash or “
v
” Slow Synchro (
➡P.33, 34). However, in
some cases the correct brightness (exposure) may
not be obtained.
not be obtained.
●
!
If you are shooting in a dark location (when the “
\
”
camera shake warning icon is displayed), use a tripod
to prevent camera shake.
to prevent camera shake.
If you use the viewfinder to take a picture in Macro
mode, the field visible through the viewfinder does
not match the field actually photographed because
the viewfinder and lens are in different positions.
Accordingly, you should use the LCD monitor to
take pictures in Macro mode.
mode, the field visible through the viewfinder does
not match the field actually photographed because
the viewfinder and lens are in different positions.
Accordingly, you should use the LCD monitor to
take pictures in Macro mode.
0
1
0
2