Fujifilm S2000 Manuel D’Utilisation

N

N ISO

Control the camera’s sensitivity to light.  Higher values can be used to reduce blur when lighting is 
poor; note, however, that mottling may appear in pictures taken at high sensitivities, particularly at set-
tings of 3200 and 6400.  If AUTO, AUTO (1600), AUTO (800), or AUTO (400) is selected, the camera 
will adjust sensitivity automatically in response to shooting conditions.  The maximum value that will 
be selected by the camera at settings of AUTO (1600), AUTO (800), or AUTO (400) is 1600, 800, or 
400 respectively.

Settings of 100 – 6400 are available only in P and M modes, AUTO (400), AUTO (800), and AUTO 
(1600) only in P and S modes; at high shutter speeds, the only options available in S mode will be 
AUTO (3200) and AUTO (6400).  AUTO is available in all modes except P, S, C, and M.  At settings of 
3200 and 6400, image quality (pg. 75) will automatically be lowered to 

2 or below; settings that 

have been altered from the value selected by the user are displayed in yellow.  The previous image 
quality will be restored when another sensitivity is selected.

Settings other than AUTO are shown by an icon in the display.

1 Note
Sensitivity is not reset when the camera is turned off  or another shooting mode is se-
lected.