Fujifilm FinePix F440 Manuel D’Utilisation
20
21
Using
the
Camera
2
1
1 Slide the Power switch sideways to turn the
camera on.
2 Set the Mode switch to “
q
”.
h Focal range: approx. 60 cm (2.0 ft.) to infinity
ON
2
Brace your elbows against your sides and hold the
camera with both hands. Position your right thumb
so that it is handy for using the zoom.
camera with both hands. Position your right thumb
so that it is handy for using the zoom.
●
!
Moving the camera while shooting gives a blurred picture
(camera shake). Use a tripod to avoid camera shake,
particularly for shots in the dark when the selected flash
mode is Suppressed flash.
(camera shake). Use a tripod to avoid camera shake,
particularly for shots in the dark when the selected flash
mode is Suppressed flash.
●
!
There may be some uneven brightness at the right edge of
the LCD monitor. This is normal and does not affect the
image.
the LCD monitor. This is normal and does not affect the
image.
3
●
!
Check that the lens is clean. If it is dirty, clean the lens as
informed on P.88.
informed on P.88.
●
!
If the flash is used in dusty conditions or when it is snowing,
white dots may appear in the image due to flash reflecting off
the dust particles or snowflakes. Use Suppressed flash
mode.
white dots may appear in the image due to flash reflecting off
the dust particles or snowflakes. Use Suppressed flash
mode.
Hold the camera so that your fingers or the strap do
not cover the lens or flash. If the lens or flash is
obscured, the brightness (exposure) of your shot
may be incorrect.
not cover the lens or flash. If the lens or flash is
obscured, the brightness (exposure) of your shot
may be incorrect.
4
Press Zoom switch “
[
(a)” to zoom in. Press “
]
(b)” to zoom out. A zoom bar appears on the LCD
monitor.
monitor.
h Optical zoom focal length
(35 mm camera equivalent)
Approx. 38 mm-130 mm
Max. zoom scale: 3.4
Approx. 38 mm-130 mm
Max. zoom scale: 3.4
×
●
!
Zooming pauses briefly when the camera changes between
optical zoom and digital zoom (
optical zoom and digital zoom (
➡P.25). Press the same
Zoom switch again to change zoom modes.
Ｎ １５
Ｎ １５
Zoom bar
0
1
0
2
●
!
Use Macro mode for subjects closer than 60 cm (2.0 ft.)
(
(
➡P.31).
●
!
When “
7
”, “
-
”, “
q
”
or “
=
” appears, see P.91.
Press the shutter button down fully. When a
clicking noise is heard, the camera records the
image.
clicking noise is heard, the camera records the
image.
●
!
There is a slight delay between the shutter button being
pressed and the picture being taken. Play back the shot to
check the image.
pressed and the picture being taken. Play back the shot to
check the image.
●
!
When pressing the shutter button down fully in one motion,
the picture is taken without the AF frame changing.
the picture is taken without the AF frame changing.
●
!
When the camera takes the picture, the viewfinder lamp lights
orange (shooting disabled). The viewfinder lamp then turns
green and the next picture can be taken.
orange (shooting disabled). The viewfinder lamp then turns
green and the next picture can be taken.
●
!
When taking a picture using the flash, the image may
disappear and go dark as the flash charges. The viewfinder
lamp then blinks orange.
disappear and go dark as the flash charges. The viewfinder
lamp then blinks orange.
●
!
See P.91, 92 for information on the warning displays.
7
Click
Use the LCD monitor to frame the shot so that the
subject fills the entire AF (Autofocus) frame.
subject fills the entire AF (Autofocus) frame.
●
!
The image shown on the LCD monitor before the picture is
taken may differ in brightness, color, etc. from the image
actually recorded. Play back the recorded image to check it
(
taken may differ in brightness, color, etc. from the image
actually recorded. Play back the recorded image to check it
(
➡P.26).
●
!
The subject may sometimes be difficult to see clearly on the
LCD monitor (in bright sunlight or dimly lit scenes, etc.). If so,
use the viewfinder to take the picture.
LCD monitor (in bright sunlight or dimly lit scenes, etc.). If so,
use the viewfinder to take the picture.
5
Ｎ １５
Ｎ １５
AF frame
Press the shutter button down halfway. When a
short double-beep is heard, the camera focuses on
your subject. The AF frame on the LCD monitor
becomes smaller and the viewfinder lamp (green)
changes from blinking to lit.
short double-beep is heard, the camera focuses on
your subject. The AF frame on the LCD monitor
becomes smaller and the viewfinder lamp (green)
changes from blinking to lit.
●
!
If the camera does not emit a short double-beep and “
{
”
appears on the LCD monitor, the camera cannot focus.
●
!
Pressing the shutter button down halfway freezes the image
on the LCD monitor briefly. This image is not the recorded
image.
on the LCD monitor briefly. This image is not the recorded
image.
●
!
If “
{
” appears on the LCD monitor (e.g. the shot is too dark
for the camera to focus), try standing about 2 m (6.6 ft.) from
the subject to take the picture.
the subject to take the picture.
●
!
The flash fires several times (pre-flashes and the main flash).
6
Bebeep
１／３２０ Ｆ２．８
１／３２０ Ｆ２．８
TAKING PICTURES (a AUTO MODE)
PHOTOGRAPHY MODE
Before the flash fires, “
∑
” appears on the LCD
monitor.
◆
Subjects not suitable for autofocus
◆
The FinePix F440 uses a high-precision autofocusing mechanism. However, it may have difficulty
focusing on the following:
h Very shiny subjects such as a mirror or car
focusing on the following:
h Very shiny subjects such as a mirror or car
body
h Subjects photographed through glass
h Subjects that do not reflect well, such as hair
h Subjects that do not reflect well, such as hair
or fur
h Subjects with no substance, such as smoke or
flames
h Dark subjects
h Fast moving subjects
h Subjects with little or no contrast between the
h Fast moving subjects
h Subjects with little or no contrast between the
subject and the background (such as white
walls or subjects dressed in the same color as
the background)
the background)
h Shots where another high-contrast object (not
the subject) is close to the AF frame and is
either closer or further away than your subject
(such as a shot of someone against a
background with strongly contrasting
elements)
either closer or further away than your subject
(such as a shot of someone against a
background with strongly contrasting
elements)
For such subjects use AF/AE lock (
➡P.24).