Fujifilm S5 Pro Manuel Du Propriétaire

Page de 244
95
Advanced Features — 
Photography
Adjusting Color Balance (T WHITE BALANCE)
Change the settings when you want to set the white 
balance to suit the natural or artificial lighting conditions 
when you shoot.
When [AUTO] is selected, the correct white balance 
sometimes cannot be obtained under special light 
sources or for subjects where people’s faces are 
highlighted, etc. In such cases, select the correct white 
balance setting for the light source.
Available settings for the white balance
A
 AUTO
The camera automatically determines the amount of 
light and the color information for the shot and takes 
the picture with a natural white balance. For best 
results, use type G or D lens.
8INCANDESCENT
Select this setting for shots when the light source is 
incandescent bulbs or lights.
FLUORESCENT LAMP-1
Select this setting for shots taken under “Daylight” 
fluorescent lamps.
FLUORESCENT LAMP-2
Select this setting for shots taken under “Daylight 
White” fluorescent lamps.
FLUORESCENT LAMP-3
Select this setting for shots taken under “Cool White” 
fluorescent lamps.
FLUORESCENT LAMP-4
Select this setting for shots taken under “Warm White” 
fluorescent lamps.
FLUORESCENT LAMP-5
Select this setting for shots taken under “Living Room 
Warm White” fluorescent lamps.
6FINE
Select this setting for outdoor shots in fine weather 
when the light source for the shot is the sun.
dFLASH
Use with built-in flash or Nikon flash units.
SHADE
Select this setting for shots taken in shade or on cloudy 
days.
CHOOSE COLOR TEMP.
Choose color temperature from list of values (
➝p.97).
]PRESET CUSTOM 1-5
The photographer can set the white balance based on 
the subject of light source. Use gray or white object as 
reference for the setting white balance.
MEMO
• Auto white balance is recommended with most light 
sources. If the desired results cannot be achieved with 
auto white balance, choose an option from the list 
above. Also, use 
 WB FINE TUNE or Preset White 
Balance.
• Auto white balance may not produce the desired results 
with studio strobe lighting. Choose a color temperature, 
use preset white balance, or set white balance to flash 
and use fine tuning to adjust white balance.
• When using settings other than 
 CHOOSE COLOR 
TEMP. and ] PRESET CUSTOM 1-5, use the built-in 
flash or Nikon SB-800 and SB-600 Speedlights to 
produce appropriate white balance at the flash firing.
Continued Q