Fujifilm f601 Manuel D’Utilisation

AUTO: Automatic adjustment

(Shooting to show the ambience of the

light source)

6

: Shooting outdoors in fine weather

7

: Shooting in shade

9

: Shooting  under  “Daylight” fluorescent

lamps

0

: Shooting under “Warm White” fluorescent

lamps

-

: Shooting under “Cool White” fluorescent

lamps

8

: Shooting in incandescent light

✽ The white balance setting (unless it is a Custom

White Balance setting) is ignored when you use the
flash. To achieve the desired effect in your shot,
press the flash back down to suppress flash
operation (

➡P.59).

This mode can be selected in the “

W

”

photography mode.
Change the white balance setting when you
want to take a picture with the white balance
fixed for the surroundings and lighting when the
picture is taken.
In Auto mode, the correct white balance may not
be obtained for subjects such as close-ups of
people’s faces and shots taken under a special
light source. In such situations, select the correct
white balance for the light source. See P.129 for
information on the white balance.

This mode can be selected in the “

W

”

photography mode.
Flash brightness adjustment allows you to
change only the amount of light emitted by the
flash to suit the photography conditions or to
achieve a desired effect.

hAdjustment range: ±2 levels

(–0.6 to +0.6 EV in 0.3 EV steps)
See P.128 for more information on EV.

x FLASH (FLASH BRIGHTNESS ADJUSTMENT)

a WHITE BALANCE (SELECTING THE LIGHT SOURCE)

●

Depending on the subject and the shooting distance,
adjusting the flash brightness may have little or no
effect.