Fujifilm FinePix A303 Manuel D’Utilisation

AC power
adapter

✽

Camera

(USB) socket

ＤＡＴＥ／ＴＩＭＥ

ＵＳＢＭＯＤＥ

ＰＯＷＥＲＳＡＶＥ

ＰＯＷＥＲＳＡＶＥＯＮ

ＯＮ

ＰＯＳＴＶＩＥＷＯＮ

ＯＮ

ＳＥＴ

ＰＣＣＡＭ

ＳＥＴ−ＵＰ

ＢＡＣＫ

ＯＫ

Plug the AC power adapter connector into the
DC IN 3V socket on the camera and then plug
the adapter itself into the main power outlet.

1. Slide the power switch to the side to turn

the camera on.

2. Set the “USB MODE” setting in the

“SET–UP” menu to “PC CAM” (

➡P.72, 73).

3. Slide the power switch to the side to turn

the camera off.

✽It is recommended that you connect the AC Power

Adapter AC-3VH (sold separately) (

➡P.87). Constant

4. Switch your PC on.
5. Use the special USB cable to connect the

camera to your computer.

6. Switch the camera on.

Always use the prescribed procedure when
disconnecting or switching off the camera
(

➡P.94).

✽Take care to ensure that the special USB cable is

connected the correct way around and that the plugs
are pushed fully into the connection sockets.

If you are using a Windows PC, the driver
settings are automatically specified when
installation ends. Just wait a few moments.

7.3 Use at PC-CAM mode

USB
socket

✽ Sold separately

power supply will prevent successful data transfer
from trouble caused by power supply.